Call us: 805-965-6326 · Your account Mon–Fri 8:00 AM – 4:30 PM · CA License #399854

Heat or AC Not Working? Check These First

A step-by-step check for no heat, no cooling, warm air or a leak, and when to stop and call.

November 15, 2026

Smell gas? Don't check anything: leave the house and call the gas company or 911 from outside. Carbon monoxide alarm? Get everyone out and call 911.

Many no-heat and no-cooling calls turn out to be something you can fix in a few minutes. Pick what's happening and go through the checks in order. If one says to stop and call, please do: 805-965-6326.

No heat

  1. The thermostat

    Set it to Heat and a few degrees above the room. If the screen is blank, replace the batteries.

  2. The power

    A furnace has a switch near it that looks like a light switch, and a breaker in the panel. Make sure both are on. You can reset a tripped breaker once.

    Stop and call: If the breaker trips again, leave it off and call.

  3. The filter

    A badly clogged filter can make a furnace overheat and shut itself off. Hold the filter up to a light: if you can't see through it, replace it.

  4. The furnace door

    Most furnaces won't run with the front panel off or loose. Make sure it's on and seated.

  5. The gas

    If other gas appliances work, the gas is on.

    Stop and call: If you smell gas, don't check anything: leave the house and call the gas company or 911 from outside.

More detail: the full article.

Heat blowing cold air

  1. Give it a minute

    Cool air is normal for the first minute of a heating cycle while the furnace warms up.

  2. The fan setting

    If the thermostat's fan is set to On, it blows between heating cycles, and that air feels cool. Set it to Auto.

  3. The filter

    Hold the filter up to a light: if you can't see through it, replace it.

If it stays cold, the burners may not be lighting: often a dirty flame sensor or a failed igniter, both technician jobs.

More detail: the full article.

AC won't turn on

  1. The thermostat

    A blank screen is the most common cause of all: replace the batteries. Then make sure it's set to Cool and the set temperature is below the room.

  2. The breakers

    Most systems have two breakers in the electrical panel: one for the indoor unit and one for the outdoor unit. If one has tripped, you can reset it once.

    Stop and call: If it trips again, leave it off and call. A breaker that keeps tripping is protecting something.

  3. The switch by the indoor unit

    Many indoor units have a switch nearby that looks like a light switch, easy to turn off by accident. Make sure it's on.

  4. Water and the drain

    Look for water in the drain pan or around the indoor unit. A clogged drain can trip a safety switch that shuts cooling off.

  5. The filter and ice

    If you see ice on the copper lines or the coil, turn cooling off, set the fan to On to thaw it, and change the filter before trying again.

  6. The outdoor unit

    Check that nothing is blocking it and that its disconnect, a small box on the wall next to it, hasn't been pulled or switched off.

    Stop and call: If the unit hums or clicks but its fan doesn't spin, turn the system off and call: running it that way can damage the compressor.

More detail: the full article.

AC blowing warm air

  1. The thermostat

    Make sure it's set to Cool, not Heat, Auto or Fan, and a few degrees below the room. If the fan is set to On instead of Auto, it blows between cooling cycles, and that air feels warm.

  2. The filter

    A clogged filter chokes the airflow. Hold it up to a light: if you can't see through it, replace it.

  3. The outdoor unit

    Go outside while it's calling for cooling: you should hear the outdoor unit's fan and compressor. If it's silent, check its breaker (reset once) and that nothing is blocking it.

    Stop and call: If the breaker trips again, or the unit hums or clicks but the fan doesn't spin, call.

  4. Ice

    Ice on the copper lines or the indoor coil means it can't move heat. Turn cooling off and set the fan to On to let it thaw.

    Stop and call: If ice comes back after you've thawed it and changed the filter, call.

More detail: the full article.

Water leaking

  1. Protect the house

    Turn cooling off at the thermostat so no more water is made. Mop up, and put a towel or bucket under any drip.

    Stop and call: If water is coming through a ceiling below an attic unit, or near light fixtures or outlets, turn the system's breaker off too and call.

  2. The filter

    Replace it if it's dirty: a dirty filter can freeze the coil, and it leaks as it thaws.

  3. The pan

    If you can safely see the drain pan, is it full? A wet-dry vacuum can clear standing water.

  4. The condensate pump

    If you have one (a small box near the indoor unit with a tube coming out): is it plugged in, and does it run when you lift its float?

More detail: the full article.

Still not working?

Call us at 805-965-6326 or book a visit online, and tell us what you've already checked. After-hours emergency service is available by phone call. Please don't open the electrical panels on the equipment or try to add refrigerant yourself: both are jobs for a licensed technician.

Related

More tips on heating, cooling.

Book a visit online

Pick a time for a service call, commercial refrigeration service, or a free estimate on a new furnace, air conditioner or heat pump. Your visit goes straight onto our schedule.

Schedule online

Or call 805-965-6326 (Mon–Fri 8:00 AM – 4:30 PM), or email service@crockerair.com.